13
•Before connecting the Electric Violin to any external devices, make sure that the power of all
external devices is turned OFF. Set the volume level of the Electric Violin and any external
audio sources to the minimum level before connecting anything. High volume settings could
cause damage to the equipment and your hearing.
•If a connection cord is unplugged while the power is ON, it may result in damage to the equip-
ment. The sudden shock to your ears may be great, so please use with care.
•Be careful not to step on the cord. The cord may break, equipment may be damaged, and this
may cause a substantial shock to your ears.
•Power is switched on when a plug is connected to one of the jacks. After playing, disconnect
the plugs to save energy.
■Using Headphones
Connect a pair of headphones, etc. to the PHONES jack (mini jack) r to monitor sound
output. The VOLUME knob t can be used to control the monitor volume.
*The VOLUME t knob’s setting does not effect the output of the LINE OUT jack.
*When a pair of headphones is used in the DIRECT Mode, battery power is required.
*Do not operate the instrument at high volume levels when using earphones (headphones) for any ex-
tended period of time. Doing so can lead to irreparable damage to your hearing.
■Controlling the Output Volume (Master Volume)
The knob u located on the tailpiece section is the Master Volume, which controls the volume
of the output from the LINE OUT jack y.
Rotate the knob to the right (clockwise) to increase volume, and rotate the knob to the left
(counter-clockwise) to decrease volume. When the knob is fully rotated to the left, its level is
“0” (no sound).
This knob functions in both Direct and Controlled modes.
u
2-EV204/205_E/R1 06.4.3, 2:04 PM13