Preparations and connections
ConnectionsNever plug the AC supply lead of this system into the AC outlet until all connections are completed.
(Singapore model)
SUBWOOFER
INPUT | OUT |
|
|
| |
| ANTENNA |
|
| FM | GND AM |
| 75Ω UNBAL. |
|
|
| DIGITAL OUT |
|
| OPTICAL |
Subwoofer system | TV MODE |
|
(Separate purchase) | PAL |
|
AUTO |
| |
SUBWOOFER |
| |
| NTSC |
|
|
| VIDEO SIGNAL |
| OUT | MONITOR |
|
| OUT |
R L
AUX/MD |
|
R L |
|
OUT |
|
| MAINS |
IN | R L |
6 Ω MIN |
|
SEE OW | 6 Ω MIN./SPEAKER |
FOR CO | SEE OWNER’S MANUAL |
FOR CONNECTION. |
FRONT
SPEAKERS
FRONT
SPEAKERS
To AC outlet
R | L |
Speakers
mConnecting speakers
Connect the speakers to the corresponding speaker terminals on the rear of the main unit respectively by using the speaker cords. Make sure that the polarity of the speaker cords is correct, that is the + and – markings are observed. If these cords are reversed, the sound will be unnatural and lack bass.
English
On the speakers
Red: positive (+)
Black: negative
2
1 3
Caution
1Press the tab
2Insert the bare wire.
[Remove approx. 5mm (1/4”) insulation from the speaker wires.]
3Release the tab and secure the wire.
On the main unit
Red: positive (+)
Black: negative
1
3
2
1Press up the tab.
2 Insert the bare wire. [Remove approx. 5mm (1/4”) insulation from the speaker wires.]
3 Press down the tab and secure the wire.
Do not let the bare speaker wires touch each other as this could damage the amplifier and/or speakers.
When connecting a subwoofer (separate purchase)
You may wish to add a subwoofer to reinforce the bass frequencies.
When connecting a subwoofer to this system, connect the SUBWOOFER OUT terminal of this system to the INPUT terminal of the subwoofer.
*Ordinary subwoofers, including the Yamaha Active Servo Processing Subwoofer System, are designed so that the amplifier and subwoofer are in the same unit.
*The SUBWOOFER OUT terminal outputs low frequencies from both left and right channels. (The