Preparations and connections
ANTENNA
FM GND AM
75Ω UNBAL.
mAntenna connection
(1) Supplied FM antenna
Connect the FM antenna wire to the corresponding terminal and direct the FM antenna wire to the direction where the strongest signal can be received.
ANTENNA
FM GND AM
75Ω UNBAL.
DIGITAL OUT
OPTICAL
(Singapore model)
(2)ANTENNA
FM GND AM
75Ω UNBAL.
(2) Supplied AM loop antenna
Connect the AM loop antenna wires to the corresponding terminals. Position the AM loop antenna for optimum reception.
Notes
cWhen static is still heard even after adjusting the position of the AM loop antenna, try reversing the wire connections (from the right terminal to the left one, and vice versa).
cThe AM loop antenna should be placed apart from the main unit. The antenna may be hung on a wall.
Using an external antenna
cUse an external FM antenna instead of an indoor FM antenna if you need better reception. Consult your dealer.
cUse an external AM antenna if you need better reception. Consult your dealer.
(Singapore model)
ANTENNA
FM GND AM
MD recorder etc. | 75Ω UNBAL. |
| |
|
| DIGITAL IN | DEGITAL OUT |
|
| OPTICAL | |
|
|
| |
|
| TV MODE |
|
|
| PAL |
|
|
| AUTO |
|
OUT | IN | NTSC |
|
SUBWOOFER | VIDEO SIGNAL | ||
|
|
| MONITOR |
|
|
| OUT |
|
| AUX/MD |
|
|
| R L |
|
|
| OUT |
|
|
| IN | R L |
|
|
| 6 Ω MIN./ |
|
|
| SEE OWNE |
|
|
| FOR CONN |
|
|
| FRONT |
|
|
| SPEAKERS |
|
| VIDEO IN | |
mConnecting external components
TV monitor
Connect a TV monitor to enjoy playing Video CDs on the builtin CD/Video CD player. Connect a TV monitor to the MONITOR OUT terminal by using an RCA pin plug cable.
External audio commponent
This system can be connected with external audio components. Connect an external audio component to the AUX/MD terminals by using RCA pin plug connector cables correctly, that is to say L (left) to L and R (right) to R.
Also, refer to the owner’s manual for the component to be connected to this system.
*A
TV monitor