Keyboard Stand Assembly
H01 Owner’s Manual
ENGLISH
25
9. Raise A.
9-1Securely hold the front side of A (the side cur-
rently facing toward the floor), then raise A.
CAUTION
• Do not hold the control panel area.
• Be careful not to drop the instrument on your foot.
10.Rotate the adjuster.
10-1Rotate the pedal height adjuster until the bot-
tom of the pedal reaches the floor.
A
After completing the assembly, please check the fol-
lowing.
•Are there any parts left over?
→Review the assembly procedure and correct any
errors.
•Is the instrument clear of doors and other movable
fixtures?
→Move the instrument to an appropriate loca-
tion.
• Does the instrument make a rattling noise when
you shake it?
→Tighten all screws.
•Does the pedal box rattle or give way when you step
on the pedals?
→Turn the adjuster so that it is set firmly against
the floor.
•Are the pedal and power cords inserted securely
into the sockets?
→Check the connection.
CAUTION
If the main unit creaks or is otherwise unsteady when
you play on the keyboard, refer to the assembly dia-
grams and retighten all screws.
CAUTION
When you relocate the unit after assembling it, be sure
to hold the bottom of the main unit. In particular, hold
the left side of the main unit along with the bottom of
the upper frame of the left leg.
CAUTION
Do not hold the key cover
or lid.
CAUTION
• Do not hold the control
panel area.
• Be careful not to drop the
instrument on your foot.
23