Keyboard Stand Assembly
Keyboard Stand Assembly
ENGLISH
CAUTION
•Be careful not to confuse parts, and be sure to install all parts in the correct direction. Please assemble the unit in the appropri- ate sequence.
•Assembly should be carried out by at least two persons.
•Be sure to use the included screws only, and insert screws of the correct size in the correct hole locations. Do not use any other screws. Use of incorrect screws can cause damage or malfunction of the product.
•Be sure to tighten all screws upon completing assembly of each unit.
•To disassemble, reverse the assembly sequence.
Have a Phillips-head (+) screwdriver ready.
Remove all parts from the box. Confirm that all parts shown in the illustration are provided.
|
| CAUTION |
|
| A | ||
Be careful not to pinch your fin- |
|
| |||||
gers when setting the instrument |
|
|
|
|
| ||
on the floor. |
|
|
|
|
| ||
|
|
|
|
| |||
C
E
D
B
6 x 30 mm long screws x 4
6 x 20 mm short screws x 10
4 x 6 mm small screws x 6
Before starting installation, remove the vinyl ties that bundle the pedal cord and AC power cord.
F
Remove two rectangle pads (800 x 130 mm) from the packing box.
1. Place A on top of the pads.
CAUTION
Do not position the pad under the control panel.
A
30 cm | 30 cm |
pads
20
22H01 Owner’s Manual
