To listen to a source with Dolby Digital, DTS or other future format by reproducing the decoded signals input at the 6CH DISCRETE INPUT terminals of this unit.

English

In step 3 on page 22, press either the DVD/LD or TV/DBS button once or more so that “6ch” appears in the display. Discrete signals from the component connected to the 6CH DISCRETE INPUT terminals of this unit are selected as the input signals.

TV/DBS

DVD/LD

VCR

TV/DBS

DVD

2CH/6CH

 

2CH/6CH

 

2CH/6CH

 

2CH/

 

 

 

or

 

 

 

PHONO

CD

TAPE/MD

UNER

PHONO

CD

TA

MONITOR

M

 

 

 

 

 

To stop listening to a decoded source with Dolby Digital, DTS, or other future format

Press the DVD/LD or TV/DBS button again to switch the input from six channel input to two channel input or select another input source. When two channel input is selected, the 6CH DISCRETE INPUT terminals are not used.

Notes on reproducing discrete signals with Dolby Digital, DTS, or other future format:

1.Your speaker system must include a center speaker.

2.Your speaker system should include a subwoofer.

*Connect a subwoofer which has a built-in amplifier directly to the SUBWOOFER OUTPUT terminal of this unit. For more details on hooking up a subwoofer to this unit, refer to pages 10 and 12.

*If you do not have a subwoofer in your system, it may be possible to make a setting on the Dolby Digital, DTS, or other future format decoder to distribute LFE channel signals to the right and left MAIN output terminals.

For details, refer to the owner’s manual supplied with your decoder.

Notes

●When you switch to the “6ch” mode, the built-in digital sound field processor (DSP) will not work and adjustments to delay time settings cannot be made.

●Switching this unit to the “6ch” mode will input no signal to this unit if there is no connection made to the 6CH DISCRETE INPUT terminals of this unit.

23