How to connect

Connect the SPEAKERS terminals to your speakers with wire of the proper gauge, cut as short as possible. If the connections are faulty, no sound will be heard from the speakers. Make sure that the polarity of the speaker wires is correct, that is the + and – markings are observed. If these wires are reversed, the sound will be unnatural and lack bass.

Caution

Do not let the bare speaker wires touch each other and do not let them touch any metal part of this unit. This could damage the unit and/or speakers.

Connecting to the MAIN SPEAKERS terminals
Connecting to the REAR and CENTER SPEAKERS terminals

Red: positive (+)

Black: negative (–)

2

1

3

1Unscrew the knob.

2 Remove approx. 5 mm (1/4”) of insulation from each of the speaker wires and insert the bare wire into the terminal.

3 Tighten the knob to secure the wire.

Red: positive (+)

 

 

Black: negative (–)

1

Press the tab.

 

 

2

Remove approx. 5 mm

 

1

(1/4”) of insulation from

 

each of the speaker

 

 

3

 

wires and insert the bare

 

 

wire into the terminal.

 

3

Release the tab to

2

 

secure the wire.

18