ANTENNA CONNECTIONS

Each antenna should be correctly connected to the designated terminals, referring to the following diagram.

Both AM and FM indoor antennas are included with this unit. In general, these antennas will probably provide sufficient signal strength. Nevertheless, a properly installed outdoor antenna will give clearer reception than an indoor one. If you experience poor reception quality, an outdoor antenna may result in improvement.

Outdoor FM antenna

Indoor FM

antennaOutdoor AM antenna (included)

AM loop antenna

75-ohm/300-ohm(included) antenna adapter

75-ohm coaxial cable

75-ohm/300-ohm antenna adapter

300-ohm feeder

Ground

Connecting the AM loop antenna

1

1

2

3

3

2

Orient so that the best reception is obtained.

*The AM loop antenna should be placed away from this unit. The antenna may be hung on a wall.

*The AM loop antenna always should be connected, even if an outdoor AM antenna is connected to this unit.

GND TERMINAL

For maximum safety and minimum interference, connect the GND terminal to a good earth ground. A good earth ground is a metal stake driven into moist earth.

Notes

•When connecting the indoor FM antenna, firmly insert its connector

into the FM ANT terminal.

• If you need an outdoor FM antenna to

improve FM reception quality, either 300-ohm feeder or coaxial

cable may be used. In locations

troubled by electrical interference, coaxial cable is preferable.

20