qINPUT MODE

This button switches the DVD/LD and TV/DBS input signal mode (AUTO/ANALOG).

wVOLUME

This control is used to raise or lower the volume level.

ePHONES jack

When you use headphones, connect the headphones to the PHONES jack. You can listen to the sound to be output from the main speakers through the headphones.

When using headphones only, set both SPEAKERS A and B to the OFF position and switch off the digital sound field processor (so that no DSP program name appears on the display) by pressing EFFECT.

rSPEAKERS

Set A or B (or both A and B) to the ON position for the main speaker system (connected to this unit) that you want to use. Set the button(s) for the main speaker system you don’t want to use to the OFF position.

tA/B/C/D/E

Press this button to select one of a group (A to E) of preset stations.

yPreset station number selector

Each of these buttons selects a preset station number (1 to 8).

uTone controls

These controls are only effective for the sound from the main speakers.

BASS

Use this control to increase or decrease the low-frequency response. The “0” position produces flat response.

TREBLE

Use this control to increase or decrease the high-frequency response. The “0” position produces flat response.

iBALANCE

This control is only effective for the sound from the main speakers.

Turn the control to adjust the balance of the output volume to the left and right speakers to compensate for sound imbalance caused by the speaker location or listening room conditions.

oRDS MODE

When an RDS station is received, pressing this button changes the display into the PS mode, PTY mode, RT mode and/or CT mode (if the station employs those RDS data services) in turn.

pPTY SEEK MODE

When this button is pressed, the unit is set in the PTY SEEK mode.

aPTY SEEK START

Press this button to begin searching for a station after the desired program type has been selected in the PTY SEEK mode.

sEON

Press this button to select the desired program type (NEWS, INFO, AFFAIRS, SPORT) when you want to call a radio program of that type automatically.

dTIME/LEVEL

Press this button to select the item in the TIME/LEVEL mode.

f+/–

These buttons are used to adjust the settings of the SET MENU mode and the TIME/LEVEL mode. In the TIME/LEVEL mode, press + to increase the delay time or speaker output level. Press –to decrease the delay time or speaker output level.

gSET MENU

Press this button to select functions in the SET MENU mode.

hPROGRAM selector

Press or to select the DSP program.

The name of the selected program appears on the display.

jEFFECT

This button switches on and off the output from the center and rear speakers so that the sound becomes the normal 2-channel.

*Even if the output from the center and rear speakers is off, when the Dolby Digital is decoded, the signals on all channels are distributed to the main channels and output from the main speakers.

kVIDEO AUX terminals

Connect an auxiliary video or audio input source unit such as a camcorder to these terminals. The source connected to these terminals can be selected by INPUT.

8