Yamaha HTR-5920 ■Selecting input modes, ■Listening with headphones, ■Adjusting the frequency response levels, ■Muting the sound, ■Playing video sources in the, background

■Selecting input modes

This unit comes with 2 types of input jacks. Do the following to select the type of input signals you want to use.

1Press INPUT l / h on the front panel repeatedly (or one of the input selector buttons on the remote control) to select “DVD” or “DTV/CBL” as the input source.

CD MD/CD-R TUNER

INPUT

or DVD DTV/CBL VCR V-AUX

Front panel Remote control

PLAYBACK

■Listening with headphones

Connect headphones to the PHONES jack.

Note

Multi-channel signals (except the LFE channel) are down-mixed to stereo and output from the headphones.

■Adjusting the frequency response levels

You can adjust the frequency response levels of your front left and right speakers.

Press TONE CONTROL on the front panel repeatedly to select “BASS” or “TREBLE”, then press BASS/TREBLE +/– on the front panel repeatedly to adjust the corresponding frequency response level.

TONE CONTROL BASS/TREBLE

2Press INPUT MODE on the front panel repeatedly to select the desired input mode.

INPUT MODE

•Select “BASS” to adjust the low frequency response level.

•Select “TREBLE” to adjust the high frequency response level.

Note

If you increase or decrease the high-frequency or low-frequency sound to an extreme level, the tonal quality of the surround speakers may not match that of the front left and right speakers.

OPERATION BASIC

AUTO	Automatically selects input signals in
	the following order:
	1) Digital signals
	2) Analog signals
DTS	Selects only digital signals encoded in
	DTS. If no DTS signals are input, no
	sound is output.
ANALOG	Selects only analog signals. If no
	analog signals are input, no sound is
	output.

y

We recommend setting the input mode to “AUTO” in most cases.

Notes

•When playing a DTS-CD/LD, be sure to set the input mode to DTS.

•Depending on the player, DTS decoding may not be performed correctly.

■Muting the sound

Press MUTE on the remote control. The MUTE indicator flashes in the front panel display.

MUTE

Press MUTE again or press VOLUME +/– on the remote control to resume the audio output. The MUTE indicator disappears from the front panel display.

■Playing video sources in the

background

You can combine a video image from a video source with sound from an audio source. For example, you can enjoy listening to classical music while viewing beautiful scenery from the video source on the video monitor.

Use the input selector buttons on the remote control to select a video source and then select an audio source.

CD MD/CD-R TUNER

DVD DTV/CBL VCR V-AUX

English

21