TROUBLESHOOTING

Problem

Cause

Remedy

Refer to

page

 

 

 

 

 

 

 

The sound suddenly

The protection circuitry has been activated

Check that the speaker wires are not touching each

—

goes off.

because of a short circuit, etc.

other and then turn this unit back on.

 

 

 

 

 

 

The sleep timer has turned this unit off.

Turn on this unit and play the source again.

—

 

 

 

 

 

The sound is muted.

Press MUTE on the remote control.

21

 

 

 

 

Only the speaker on

Incorrect cable connections.

Connect the cables properly. If the problem persists,

11

one side can be

 

the cables may be defective.

 

heard.

 

 

 

 

 

 

 

No sound from the

The output level of the front speakers is

Raise the level of the front speakers.

32

front speakers

set to minimum.

 

 

 

 

 

 

Only the center

When playing a monaural source with a

 

 

speaker outputs

surround mode, the source signal is

 

 

substantial sound.

directed to the center channel, and the

 

 

 

front and surround speakers output effect

 

 

 

sounds.

 

 

 

 

 

 

No sound from the

The surround modes are turned off.

Press PROGRAM l / h on the front panel (or one

22

effect speakers.

 

of the surround mode selector buttons on the remote

 

 

 

control) to set this unit to the surround mode.

 

 

 

 

 

 

You are using a source or surround mode

Try another surround mode.

22

 

combination that does not output sound

 

 

 

from all channels.

 

 

 

 

 

 

No sound from the

The output level of the center speaker is

Raise the level of the center speaker.

32

center speaker.

set to minimum.

 

 

 

 

 

 

 

“CNTR” is set to NONE.

Select the appropriate setting for the center speaker.

19

 

 

 

 

No sound from the

The output level of the surround speakers

Raise the output level of the surround speakers.

32

surround speakers.

is set to minimum.

 

 

 

 

 

 

 

“SURR” is set to NONE.

Select the appropriate setting for the surround left and

19

 

 

right speakers.

 

 

 

 

 

No sound from the

The output level of the subwoofer is set to

Raise the level of the subwoofer.

32

subwoofer.

minimum.

 

 

 

 

 

 

 

“SWFR” is set to NONE.

Select “YES”.

19

 

 

 

 

 

The source does not contain low bass

 

 

 

signals.

 

 

 

 

 

 

34