36 TOOLS for i88X/mLAN16E, Plug-in Effect Installation Guide
English
Setting up OMS
• If you are using mLAN on your Macintosh with an
optionally installed IEEE 1394 (FireWire) interface
card, recreate a new Studio Setup by OMS Setup
included in the installation CD-ROM. For details, refer
to the OMS manual.
1Double-click on the “OMS” folder and “OMS-
Setup for YAMAHA” folder. The “i88X-mLAN,”
“MOTIF-ES-mLAN” and “mLAN Generic 16
ports” files appear. Copy this to the hard disk
on your computer.
2If you are connecting a single i88X or
mLAN16E (including MOTIF ES) using Auto
Connector, double-click “i88X-mLAN” or
“MOTIF ES-mLAN.”
If you are connecting multiple mLAN devices
using Graphic Patchbay or connecting a sin-
gle mLAN16E (excluding MOTIF ES) using
Auto Connector, double-click “mLAN Generic
16 Ports.” The OMS Setup starts.
3After starting the OMS Setup, the Studio setup
file double-clicked in step 2 opens.
If “ ” is not indicated at the right of the setup
file name, select “Make Current” from the
“File” menu and execute the save operation.
The OMS studio setup has been completed.
You’ll also need to set the OMS port when
using the software.
Refer to the owner’s manual for your applica-
tion.
• Double clicking the icon of the mLAN device or
executing “MIDI Device Info...” from the “Studio”
menu by selecting the mLAN device, calls up the
Device Info dialog box. We recommend that you
not change the channel assignment since this is
already set by the setup application (mLAN Auto
Connector, etc.) for optimum use with i88X and
mLAN16E. Reset the settings as shown in the
illustration below if you have inadvertently
changed them.
The setting names (device names) of each
MIDI port are as shown below, when the Stu-
dio Setup file is loaded. Select the proper
device (port) for the application you are using.
i88X (Auto Connector) port function
MOTIF ES (Auto Connector) port function
• You can assign a function to each MIDI port on the
MOTIF ES. This example uses typical device
names.
Port functions in mLAN Graphic Patchbay and
on the mLAN16E (excluding MOTIF ES)
MIDI
Port Device Name Function
1 MIDI
i88X’s MIDI port (MIDI to
(from) mLAN MIDI
conversion)
MIDI
Port Device Name Function
1TG Controls a tone generator.
2 PLG Controls a Plug-in.
3 Remote B Controls a DAW or editor.
4 Remote A Controls a DAW or editor.
MID Port Device Name Function
1Port 1 Port functions vary
depending on the specific
mLAN device. Refer to the
owner’s manual for your
mLAN device.
2Port 2
. . . . . . . .
16 Port 16