Yamaha KX-10 SPECIFICATIONS, GENERAL, Cure, Head, Fault, Cause, Motor, Weight, Accessories, Output Level, General model, Power Supplies, Wow and Flutter, Frequency Response

			ENGLISH
Fault	Cause	Cure
Playback sound is muffled and high	¶ A tape recorded without Dolby NR is	¶ Playback in OFF position.
frequencies are inaudible.	played back with Dolby NR on.
	¶ Heads are dirty.	¶ Clean heads and carry out
	¶ Heads are magnetized.	demagnetization with head
		demagnetizer.
When playing back tapes recorded on	¶ Basic levels are different for different	¶ This is not a fault.
other decks, meter deflections are	cassette decks.
greater (smaller) than when recording.

SPECIFICATIONS

Track Configuration ....................	4 track, 2 channel stereo
Motor ...........................................	DC servo motor (capstan)
	DC motor (reel)
	DC motor (tray)
Head ...........................................	Recording: hard permalloy
	Playback: hard permalloy
	Erase: double-gap Ferrite
Rapid Transport ............................................	95 sec. (C-60)
Wow and Flutter
W.RMS ....................................................	less than 0.05%
W.Peak ..................................................	less than ±0.08%
Signal-to-Noise Ratio
(Dolby NR off) ......................................	better than 60 dB
(Dolby B NR on) ..................................	better than 68 dB
(Dolby C NR on) ..................................	better than 76 dB
Frequency Response
Normal tape (–20 dB)...................	20 - 17,000 Hz ±3 dB
High (CrO2) tape (–20 dB)............	20 - 18,000 Hz ±3 dB
Metal tape (–20 dB)......................	20 - 20,000 Hz ±3 dB
Harmonic Distortion
Normal tape .............................................	less than 0.8%
High (CrO2) tape ......................................	less than 0.8%
Metal tape .................................................	less than 0.8%
Input Sensitivity/Impedance
Line ....................................................	100 mV/50 k-ohms
Output Level
Line ...................................................	570 mV/2.2 k-ohms
Channel Separation (1 kHz) ......................................	40 dB
Cross Talk (125 Hz) ...................................................	55 dB

GENERAL

Power Supplies
Europe model .............................................		230 V, 50 Hz
U.K. model and Australia model		.............. 240 V, 50 Hz
General model .................	110/120/220/240 V, 50/60 Hz
Power Consumption ...................................................		16 W
		5 W(POWER OFF)
Dimensions (W x H x D) .....................		280 x 119 x 360 mm
	(11 x 4-11/16" x 14-3/16")
Weight ..................................................		4.8 kg (10 lbs. 9 oz.)
Accessories
Connecting cords .........................................................		2

* Specifications subject to change without notice.

15