|
|
|
| ENGLISH |
Playback sound is muffled and high | ÷ | ÷ Playback in OFF position. |
| |
Fault | Cause | Cure |
|
|
frequencies are inaudible. | Dolby NR. |
|
|
|
| ÷ Heads are dirty. | ÷ Clean heads and carry out demagnetiza- |
|
|
|
| |||
| ÷ Heads are magnetized. | tion with head demagnetizer. |
|
|
|
|
|
|
|
When playing back tapes recorded on | ÷ Basic levels are different for different | ÷ This is not a fault. |
|
|
other decks, meter deflections are | cassette decks. |
|
|
|
greater (smaller) than when recorded. |
|
|
|
|
|
|
|
|
|
÷ Protective tabs on cassette have been | ÷ Replace cassette tape, or cover tab |
|
| |
Recordings cannot be made with | broken off. | holes with tape, etc. |
|
|
TIMER REC (deck only plays back). |
|
|
|
|
|
|
|
|
|
The remote control transmitter cannot | ÷ The batteries are exhausted. | ÷ Replace batteries. |
|
|
be operated. | ÷ The remote control transmitter is operated | ÷ Operate it from less than 7 meters (about |
|
|
| from an incorrect distance or angle. | 23 ft.) and 30°. |
|
|
| ÷ The remote control sensor is lighted | ÷ Place the unit away from the strong light. |
|
|
| strongly. |
|
|
|
|
|
|
|
|
SPECIFICATIONS
Track Configuration | ................. | 4 track, 2 channel stereo |
Motor ................................... | DC servo motor (capstan) | |
| ||
|
| Flat torque DC motor (reel) |
DC servo motor | ||
Head ........................ | Recording/playback: hard permalloy | |
|
| Erase: |
Rapid Transport...................................................... | 90 sec. | |
| ||
100 sec. | ||
Wow and Flutter |
|
|
0.05% | ||
WRMS |
| |
W.Peak ................................................................ | ±0.08% | |
0.07% | ||
WRMS |
| |
W.Peak ................................................................ | ±0.12% | |
| ||
60 dB | ||
Dolby NR off |
| |
Dolby B NR on ...................................................... | 68 dB | |
Dolby C NR on ...................................................... | 76 dB | |
58 dB | ||
Dolby NR off |
| |
Dolby B NR on ...................................................... | 66 dB | |
Dolby C NR on ...................................................... | 74 dB | |
Frequency Response |
| |
................ | 20 ~ 17,000 Hz ±3 dB | |
Normal tape | ||
CrO2 tape | 20 ~ 18,000 Hz ±3 dB | |
Metal tape | 20 ~ 20,000 Hz ±3 dB | |
................ | 20 ~ 16,000 Hz ±3 dB | |
Normal tape | ||
CrO2 tape | 20 ~ 17,000 Hz ±3 dB | |
Metal tape | 20 ~ 19,000 Hz ±3 dB | |
Harmonic Distortion | ................................................... | 0.8% |
Input Sensitivity/Impedance................................................... | 100 mV/50 | |
Line |
| |
Output ..................................................Level | 570 mV/1.0 | |
Line |
| |
Phones .................................................. | 1.5 mW/8 ohms | |
Channel Separation (1 kHz) | .................................... | 40 dB |
Cross Talk (125 Hz) .................................................. | 55 dB | |
GENERAL |
|
|
Power Supplies | ....................... | 120 V, 60 Hz |
U.S.A. and Canada model | ||
Europe and U.K. model ........................... | 230 V, 50 Hz | |
Australia model ........................................ | 240 V, 50 Hz | |
General model ............... | 110/120/220/240 V, 50/60 Hz | |
Power Consumption ................................. | 16 W | |
|
| 12 W |
|
| 5 W (Standby) |
Dimensions (W x H x D) |
| 435 x 125.5 x 278.5 mm |
(Approx. | ||
435 x 125.5 x 283 mm | ||
(Approx. | ||
Weight ........................................... | 4.5 kg (9 lbs. 15 oz.) | |
| ||
4.4 kg (9 lbs. 11 oz.) | ||
Accessories ................................................. | 1 pair | |
Output/input cord |
|
*Specifications subject to change without notice.
17