To stop playback:
Press the & button.
To fast forward the tape:
Press the ⁄ button.
To fast rewind the tape:
Press the ! button.
To adjust the volume level:
Use the volume control of the amplifier or receiver.
To use headphones for private listening:
Insert the headphones plug into the PHONES jack.
To adjust the headphones level:
Use the PHONES LEVEL control.
DOLBY NR button setting (in step 2)
DOLBY NR (OFF/ 
B/ 
C/MPX) button
Be sure to set the DOLBY NR (OFF/ 
B/ 
C/MPX) button according to the system used for recording. Each time this button is pressed, Dolby NR switches as follows:
3 
B(MPX OFF) For a tape recorded with DOLBY B NR Only the 
B indicator lights.
C(MPX OFF) For a tape recorded with DOLBY C NR Only the 
C indicator lights.
|
| ||
|
| B MPX ON | (available only for recording) |
|
| ||
|
| ||
|
| C MPX ON | (available only for recording) |
| For a tape recorded with DOLBY NR | ||
OFF | |||
|
|
| OFF |
|
|
| No indicator lights. |
Note: The MPX filter settings are explained on page 9.
Responce |
|
|
|
| ||
|
|
|
| |||
|
|
|
|
| ||
ReductionNoise |
|
|
| 10 dB | ||
|
|
| ||||
|
|
| 10 dB |
|
| |
|
|
|
|
| ||
|
|
|
|
| ||
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
20 | 100 | 1k | 10k 20k Hz | |||
PLAY TRIM control adjustment
When the level of high frequencies is too boosted or absent while playing a tape recorded on another cassette deck, adjust the high frequency response with the PLAY TRIM control.
When high frequencies are | When high frequencies are | |
too boosted, attenuate the | absent, boost the high | |
high frequencies. | frequencies. | |
|
| |
|
| |
| PLAY TRIM | PLAY TRIM |
0 | 0 | |
PLAY TRIM | PLAY TRIM |
00
|
|
|
|
|
|
| 1 | High frequency sound is |
|
|
| 1 |
| too boosted. | |||
|
|
| 2 | Flat. | ||||
|
| 10 dB | 2 | |||||
|
|
|
|
| 3 | 3 | High frequency sound is | |
|
|
|
|
|
| |||
100 | 1k | 10kHz |
| absent. | ||||
|
|
|
|
|
|
|
|
|
6