Control Templates
Owner’s Manual
30
Changing the Control Change number generated by using the CONTROL knob
You can change the Control Change number
assigned to the CONTROL knob from the default
setting as desired.
1.
Press the [CONTROL TEMPLATE] button.
The LED lamp lights and the Control Template
selection display appears.
2.
Use the DATA [DEC] and [INC] buttons to
select the desired Control Template.
3.
Use the SELECT [▲] and [▼] buttons to
select the desired CONTROL knob.
4.
Use the DATA [DEC] and [INC] buttons to
change the Control Change number of the
selected CONTROL knob.
5.
Press the [EXIT] button to return to the
original display.
NOTE
The setting here is automatically stored to
the internal memory of the KX. If you want to
back up the setting here, use the KX Editor
(page 6) to store the setting to a computer.
NOTE
If a different, unrelated display appears even
when you press the [CONTROL
TEMPLATE] button, press the [CONTROL
TEMPLATE] button again or press the
SELECT [▲] button once or twice to call up
the Control Template selection display.
NOTE
The Control Change numbers available for
adjusting the parameters may differ
depending on the particular VSTi. For
details, refer to the relevant owner’s manual
of your VSTi.
NOTE
The display of the KX shows the Control
Change number in decimal. Keep in mind
that the Control Change number may be
described in hexadecimal depending on the
manual of the VSTi.