DME-N Network Driver Installation Guide for LS9 3
To operate your Yamaha hardware from your computer via Ethernet, you'll need to install the DME-N Network Driver
software.
DME-N Network Driver is software that transfers MIDI data back and forth between your computer and the
hardware via Ethernet cable.
Connect the computer to the LS9 by using an Ethernet cable via a switching hub. When you connect the computer
to the LS9 directly, you can use either a crossover or straight cable.
DME-N Network Driver applies to the system requirements of LS9 Editor. Refer to the LS9 Editor Installation Guide
for details.
1Log onto Windows with Administrator privileges.
2Extract the data from the downloaded compressed file and open the “DME_Networkdrv_v***” folder.
“***” represents the version number.
3Double-click on “Setup.exe.”
When the setup has been initialized, a “Welcome” window appears.
nWhen running under Windows Vista, the “User Account Control” dialog box may appear. Click [Continue].
4Click [Next]. The DME-N Network Driver will be installed.
When installation is complete, a message appears indicating that setup has been completed.
5In order for the newly installed DME-N Network Driver to take effect, select “Yes, I want to restart my

computer now,” and click [OK].

The computer will restart.
The DME-N Network Driver has been installed.
DME-N Network DriverConnection of computer and the LS9Minimum System RequirementsInstallation
Editor
Driver
Computer
Ethernet cable Ethernet cable
Switching Hub
or
Ethernet cable
LS9