DME-N Network Driver Installation Guide for LS9 9
Windows XP
1 Select [Start] → [Control Panel].
The “Control Panel” is displayed.
2If the “Control Panel” is in Category display, click [Switch to Classic View].
3Double-click [Network Connections] → [Local Area Connection].
The “Local Area Connection Status” dialog box will be displayed.
4Click [Properties] on the [General] tab.
The “Local Area Connection Properties” dialog box will be displayed.
5Select [Internet Protocol (TCP/IP)] on the [General] tab, then click [Properties].
The “Internet Protocol (TCP/IP) Properties” dialog box will be displayed.
6Click [Use the following IP address] on the [General] tab.
7Enter your computer’s IP address into [IP address], the Gateway’s IP address into [Default gateway],
and “255.255.255.0” into [Subnet mask].
nWhen installing on the same subnet as the DME unit(s), set the gateway’s host address to 254.
8Click [OK].
9Restart your computer.
TCP/IP Settings