To check the programmed data
1Stop or pause program playback.
2Press SKIP $ or › to skip through the step information (or use the jog dial on the front panel).
To delete a specific step
1Stop program playback.
2Press SKIP $ or › to skip through the step information (or use the jog dial on the front panel).
3Press DELETE (or DELETE/CANCEL on the front panel) to delete the step. The higher steps are renumbered automatically.
To change a step
1Stop program playback.
2Press SKIP $ or › to skip through the step information (or use the jog dial on the front panel).
3Use the numeric buttons to program a new track number for that step. The original track is cleared from memory and the new track is programmed.
To cancel
Press PROG to turn off the PROGRAM indicator, eject the disc, or press POWER to turn this unit off.
Notes
•If the total time exceeds 255 minutes “255mOver” is displayed instead of the total time.
•SKIP $ or › can be used during playback to skip between programmed tracks.
•SEARCH ⁄ can be used during playback to search through all tracks in the current program.
•SEARCH ! can be used during playback to return to the beginning of the current track.
To use headphones for private listening
Set the PHONES LEVEL knob on the front panel to “0” (minimum) and insert the headphones plug of your stereo headphones into the PHONES jack.
To adjust the volume level of the headphones Use the PHONES LEVEL knob.
Turn toward “10” (maximum) to increase the volume. Turn toward “0” (minimum) to decrease the volume.
12