MG10/2 21
Setting Up(1) Before connecting to microphones and instruments, be sure
that all devices are turned off. Also be sure that all of the chan-
nel controls and all of the controls in the Master Control sec-
tion are turned to their minimum settings.
(2) For each connection, connect one end of the cable to the rele-
vant microphone or instrument and connect the other end to the
appropriate LINE or MIC jack on the mixer.
Where an input channel provides both a MIC INPUT
jack and a LINE INPUT jack, you may use either
one of these jacks but you may not use both at the
same time. Please connect to only one of these
jacks on each channel.
(3) To avoid causing damage to speakers, power up the devices in
the following order: Peripheral devices → mixer → power
amps (or powered speakers).
When shutting the system down, turn off the power
in the opposite order: Power amps (powered speak-
ers) → mixer → peripheral devices.
Setup Procedure NOTE
NOTE
Setup Examples
Rhythm Machine
Effector
Synthesizer
MTR
Guitar
Powered Monitor
Speakers
Microphone
Headphones
Master Recorder
(MD, CD-R, DAT, etc.)
Sound Source (CD, MD,
DAT, cassette, video, etc.)
Sound Source (CD, MD,
DAT, cassette, video, etc.)
MG10_E.book Page 21 Monday, May 26, 2003 1:52 PM