23

Recording Functions

User’s Guide

The AUTO PUNCH and START indicators (

^

) on the display and the indicator above the REHE

key will begin flashing.

4) Press the PLAY key (or step on the footswitch) to play the tape.

The START indicator will light and the IN indicator will begin flashing. The indicator above the

REC/PAUSE key will flash rapidly.

5) At the punch-in location, press the REC/PAUSE key (or step on the footswitch).

The START indicator will switch off, the IN indicator will light, the OUT indicator will begin

flashing, and the punch-in point will be stored. The indicator above the PLAY key will flash rapidly.

6) At the punch-out location, press the PLAY key (or step on the footswitch).

The IN indicator will switch off, the OUT indicator will light, and punch-out point will be stored.

Ten (10) counts on the tape counter (at 9.5 cm/sec - 5 counts at 4.8 cm/sec) after the punch-out

location becomes the post-roll point. The OUT indicator will switch off, the START indicator will

begin flashing, and the tape is automatically rewound back to the pre-roll point.

When tape is rewound, the AUTO PUNCH and START indicators will light and the indicator above

the REHE key will flash rapidly.

Note:

The AUTO PUNCH indicator will either be flashing or illuminated while the automatic punch-in/

out function is active.

Note:

You can reverse the order of steps 3 and 4. In this case, you would mark the start

point while playing by pressing the AUTO PUNCH I/O key.

TAPE
9.5
+9
6
3
0
3
6
10
-20
+9
6
3
0
3
6
10
-20
1234 LR
START
AUTO PUNCH PLAYREC/PAUSEREHE
TAPE
9.5
+9
6
3
0
3
6
10
-20
+9
6
3
0
3
6
10
-20
1234 LR
INSTART
AUTO PUNCH PLAYREC/PAUSEREHE
OUT
TAPE
9.5
+9
6
3
0
3
6
10
-20
+9
6
3
0
3
6
10
-20
1234 LR
IN
AUTO PUNCH PLAYREC/PAUSEREHE
OUT
TAPE
9.5
+9
6
3
0
3
6
10
-20
+9
6
3
0
3
6
10
-20
1234 LR
AUTO PUNCH PLAYREC/PAUSEREHE
TAPE
9.5
+9
6
3
0
3
6
10
-20
+9
6
3
0
3
6
10
-20
1234 LR
START
AUTO PUNCH PLAYREC/PAUSEREHE