43 Memory Functions
User’s Guide
2) Press the REC SELECT key (G) corresponding to the track you want to check.
The maximum level segment of the selected track will light and the tape counter will display the
corresponding location value for as long as the two keys are pressed. If the level is beyond the
recommended level, the segment will flash.
The following display shows Track 2 being checked.
If you reset the tape counter after the recording, the location displayed will be incorrect. Unlike the
memo function, the MT4X does not re-calculate the maximum level memory locations.
Clear the maximum level data
1) Press and hold the STOP key (W).
2) Press the CLEAR key (L).
When the data is cleared, the -20 dB segments on the level meters for all four tracks and the stereo
signal will flash three times.
Note: If the maximum level is reached a several locations, only the first location is
displayed.
Note: The maximum recording level data is NOT cleared automatically. Before each
recording, you should reset the stored levels. Otherwise you could mistake the levels of a
previous recording for the current recording.
TAPE
9.5
+9
6
3
0
3
6
10
-20
+9
6
3
0
3
6
10
-20
1234 LR
REC SELECT
1 2 3 4
TAPE
9.5
+9
6
3
0
3
6
10
-20
+9
6
3
0
3
6
10
-20
1234 LR