Recording Functions 30User’s Guide
If required, add effects using the AUX SEND and AUX RETURN controls and connectors. Adjust
the effects for each channel.
9) Press the RETURN TO ZERO key to stop and rewind the tape.
Recording
10) Press the REC/PAUSE key.
The indicator over the key lights and the REC SELECT - TRACK indicators will be illuminated.
11) Press the PLAY key to start recording.
The indicator above the key lights and the MT4X starts the tape.
12) When the recording is finished, press the RETURN TO ZERO key to stop and rewind the tape.
The indicators over the REC/PAUSE and PLAY keys switch off and the REC SELECT - TRACK
indicators resume flashing.
Check the recording
13) Release the MONITOR SELECT - GROUP key corresponding to the destination track and press the
CUE key.
14) Adjust the CUE LEVEL control of the newly-recorded destination track.
15) Press the PLAY key to start playback of the tape.
If the resulting recording needs to be redone, repeat from step 6.
Overdubbing/ping-pong recording
Note: You cannot apply effects to the individual tracks nor can you adjust the sound balance once you
have mixed them onto a single track. You must apply any effects, and adjust the equalization and balance,
during the bounce-down recording.
(Drum track)
(Bassguitar track)
(Guitar track)
Synth & Rhythm track
Drum track
Bassguitar track
Guitar track
a
b
a
n
d
o
n
p
o
e
p
l
e
Track 1Track 1
Track 2Track 2
Track 3Track 3
Track 4Track 4