Front & Rear Panels
MW12CX/MW12C Owner’s Manual
Reference
18
Master Control Section
12TR IN Jacks
These RCA pin jacks can be used to input a stereo sound
source. Use these jacks when you want to connect a CD
player directly to the mixer.
•Select where you want to send the signal using the
2TR IN/USB switch E, and adjust the signal level
using the 2TR IN/USB control in the Master Control
section.
•A signals input via both the 2TR IN input and the
USB input are mixed.
2REC OUT 1 (L, R) Jacks
These are RCA pin jacks that can be used to connect to an
external stereo recorder. The signal processed by the REC
OUT fader is output via these jacks.
3REC OUT 2 (L, R) Jacks
These are impedance-balanced TRS phone jacks that can be
used to connect to an external stereo recorder. The signal
processed by the REC OUT fader is output via the these
jacks.
4RETURN L (MONO), R Jacks
These are unbalanced phone-jack type line inputs. The signal
received by these jacks is sent to the STEREO L/R bus and
the AUX (AUX1) bus. These jacks are typically used to
receive the signal returned from an external effect device
(reverb, delay, etc.).
These jacks can also be used as an auxiliary stereo
input. If you connect to the L (MONO) jack only, the
mixer will recognize the signal as monaural and will
send the identical signal to both the L and R jacks.
5SEND Jacks
•AUX (AUX1)
This is an impedance balanced* TRS phone jack that outputs
the signals from AUX (AUX1) bus. You can use this jack, for
example, to connect to an effect unit, cue box, or other mon-
itoring system.
• EFFECT (AUX2)
This is an impedance balanced* TRS phone jack that outputs
the signal from the EFFECT (AUX2) bus. You can use this
jack, for example, to connect to an external effect unit.
6STEREO OUT (L, R) Jacks
These jacks deliver the mixer’s stereo output. You can use
these jacks, for example, to connect to the power amplifier
driving your main speakers. You can also connect these jacks
to a recording device when you wish to record mixer’s stereo
output while using the STEREO OUT Master fader H for
level control.
• XLR jacks
XLR-type balanced output jacks.
• LINE jacks
TRS phone-jack type balanced outputs.
7MONITOR OUT Jacks
Connect these impedance-balanced* TRS phone jacks to
your monitor system.
The signal output by these jacks is determined by the
MONITOR switch D, the 2TR IN/USB E, and the
PFL switches on the input channels.

F

G

B

H

C

0

9

A

D

E

6

8

1

4

2

7

35

MW12CX
* impedance balanced
Since the hot and cold terminals of impedance bal-
anced output jacks have the same impedance, these
output jacks are less affected by induced noise.
NOTE
NOTE
NOTE