N3/N2 Owner’s Manual •29
Recording your Performance
ENGLISH
The recorded user song data on this instrument can be saved to a USB flash memory device. Before using a USB flash
memory device, be sure to read “Precautions when using the USB [TO DEVICE] terminal” on page 30.
1

Engage Saving mode.

Make sure that a USB flash memory device is connected to the instrument, then
while holding the [FUNCTION] button, press the [PLAY/STOP] button.
↓
“Uxx” (xx is a number) appears on the display after “SAu.”
If you wish to cancel saving, press any button other than [
PLAY/STOP
] button
before you go on to the next step.
2

Save the data.

Press the [PLAY/STOP] button.
↓
Data writing will begin.
When the saving is finished, “End” appears on the display
for three seconds.

Saving Your Recorded Performance to USB Flash Memory

11,
2
Songs recorded on this instrument are
saved under the file names of “USER-
SONGxx.mid” (xx is a number 00–99) in
the “USER FILES” folder.
The number of available file containers is
100 (U00–U99).
Do not turn off the power to the instrument or disconnect the USB flash memory device, while the instru-
ment is saving the data to the USB device (while “---“ is displayed ). Otherwise, all data, including
the data being saved, will be lost.
End
CAUTION
27