N3/N2 Owner’s Manual •33
ENGLISH
Formatting USB Flash Memory
Certain USB flash memory devices may require formatting before they can be used by this instrument.
If you format a USB flash memory that already contains data, all of the data will be erased. Be careful not to
erase important data when using the format function.
1

Engage the Format mode.

After connecting the USB flash memory device to be formatted to the instrument,
press the [RECORD] button while holding the [FUNCTION] button.
↓
The message “For” (Format) appears on the display.
2

Start Formatting.

After pressing the [PLAY/STOP] button, a “n Y” message appears on the display.
Press the [+] button to execute the formatting operation. Press the [-] button to can-
cel formatting.
↓
When the formatting is finished, “End” appears on the display for three seconds.
3

Exit from the Format mode.

Press any one of the buttons.
CAUTION

121 2

Do not turn off the power to the instrument or disconnect the USB flash memory device, while the instru-
ment is formatting the USB device (while “---“ is displayed ). Doing so may damage the data or the
USB flash memory itself.
For
CAUTION
31