Before Using
NP-30/YNP-25 Owner’s Manual 13
Setting the Volume
Initially set the [MASTER VOLUME] slider about halfway between the
“MIN” and “MAX” settings. Then, when you start playing, re-adjust the
[MASTER VOLUME] slider to the most comfortable listening level.
Using the Pedal
[SUSTAIN] jack
This jack is for connecting an optional pedal.
The pedal functions in the same way as a damper pedal on an acoustic
piano. Connect an optional pedal to this jack and press the pedal to sus-
tain the sound.
Do not press the footswitch while turning the power on. Doing this
changes the recognized polarity of the footswitch, resulting in reversed
footswitch operation.
If you connect an optional pedal of FC3, the half pedal function* can be
used.
* half pedal function
While you playing the piano with SUSTAIN and if you need to delete the
cloudy sound, release the foot from pedal to half position.
Using Headphones
Connect a set of headphones to the [PHONES/OUTPUT] jack.
CAUTION
To protect your hearing, avoid listening to the NP-30/YNP-25 at a high vol-
ume level for long periods of time.
Music Rest
The NP-30/YNP-25 includes a music rest that can be attached to the
instrument by inserting it into the slot at the top of the control panel.
CAUTION
Since speakers are built into the instrument you should be careful to never
leave any video tapes, cassette tapes, floppy disks or any kind of magnetic
storage media on the panel—doing so may result in data loss or damage to
the items. Also avoid using the instrument near a television or computer
monitor, since interference may result.
TERMINOLOGY MASTER VOLUME:
The volume level of the entire keyboard sound
Make sure that power is OFF when connecting or disconnecting the
pedal.
The level increases.The level decreases.
FC5
NOTE