INSTALLATION OF THE CENTER SPEAKER
To prevent the center speaker from falling, secure it with the supplied velcro strips when placing it on a television or other device.
Using the Velcro Strips
Precautions before installation
•Do not touch the adhesive surface after peeling off the strip as this will weaken its adhesive strength.
•Thoroughly wipe clean the surface where the velcro strip is to be applied. Note that adhesive strength is weakened if the surface is dusty, oily or wet and that this may cause the center speaker to drop.
1Peel off the seal of the velcro strip with the rough surface and apply to the appropriate positions as shown in the illustration below.
3Peel off the seal of the velcro strip with the smooth surface and apply to the positions determined in step 2.
Peel off the
Peel off theRough surfaceseal. seal.
Smooth surface
Center speaker (bottom panel)
2 Place the center speaker where it is to be |
| 4 Align both the velcro strips on both sides and | |||
installed (ex. on top of the television ) to | firmly press downward on the top of the center | ||||
determine where to apply the velcro strip with | speaker. | ||||
the smooth surface. | Press down. | ||||
Determine the velcro strips position on the television so | |||||
|
|
| |||
|
|
| |||
that the velcro strips should be matched with those of |
|
|
| ||
|
|
| |||
the center speaker. |
|
|
| ||
|
|
| |||
Note
• Once the center speaker is secured in this way, the paint on the television surface used for installation may peel off when velcro strip is removed later. Be sure to apply velcro strip after carefully checking the surface to be used for installation.
6