Yamaha NX-SW10 CONNECTIONS, Connecting the Center Speaker and the Rear Speakers to the Subwoofer

CONNECTIONS

CAUTION

Always be sure to turn off the power of any component to be connected when making connections.

To ensure proper connections

•Be sure all connections are made correctly, that is to say L (left) to L, R (right) to R, “+” to “+” and “–” to “–”. Some components require different connection methods and have different terminal names. Refer to the instructions for each component to be connected to this unit.

Connecting the Center Speaker and the Rear Speakers to the Subwoofer

Note

•Do not connect any speakers to the speaker terminals on the subwoofer except for the supplied center speaker (NX-VS10C) and rear speakers (NX-VS10E). Damage may result if a different speaker is connected.

y

Remove the plastic insulation from the ends of the speaker cords and twist the bare wires. (The bare wire will stay neat if you twist while removing the plastic insulation.)

The rear panel of the subwoofer

REAR, CENTER SPEAKERS

+ +

– –

REAR R

DO NOT CONNECT THIS UNIT TO

SPEAKERS OTHER THAN NX-VS10E,

NX-VS10C

Speaker cord	CENTER	Speaker cord
identification label		identification label

REAR L

– + – +

–+

Right rear speaker Center speaker Left rear speaker

English

3