INSTALLATION OF THE REAR SPEAKERS
Using Commercially Available Speaker Brackets (distance between screw
holes: 60 mm)
1Attach the type B bracket to the bottom of the speakers using the supplied screws.
Align so that the protrusion on the bracket goes into the groove on the bottom of the speaker.
Supplied screw
Type B bracket
2Mount the speaker on the speaker stand using the bracket holes (spaced at 60 mm).
Be sure to prepare the small screws (diameter: 4 mm,
length: 8 mm), spring washers and washers.
CAUTIONS
Be sure to read these important precautions.
•Each speaker weighs approximately 0.7 kg. Select a firm wall or pillar to attach screws to. Do not attach screws to material such as mortar or veneer as screws may come loose easily, causing the speaker to fall.
•Do not mount speakers using nails or tape as vibrations during operation may cause nails to come loose or tape to peel off, causing the speaker to fall.
•Take care that the speaker cord is not pinched between the speaker and the bracket. Be sure that the speaker cord passes through the groove on the rear panel of the speaker.
•Secure the speaker cords so that they will not catch on hands or feet, causing speakers to drop.
•Be absolutely sure to check for safety after speakers are mounted. YAMAHA bears no responsibility for damage caused due to improper installation or installation in an improper location.
60 mm
8