Detailed Settings – [FUNCTION]
P-155 Owner’s Manual
ENGLISH
41
F2.2: Base Note
If you select a scale other than Equal Temperament, you
need to specify the root. (You can also specify the root
note with Equal Temperament selected, but it will have
no effect. The base note setting is effective for tunings
other than the Equal Temperament tuning.)
Setting range: C, C#, D, Eb, E, F, F#, G, Ab, A, Bb, B
Default setting: C
•Root indication example
You can set various parameters for Dual
(page 17) to optimize the settings for the
songs you play, such as adjusting the volume
balance between two voices.
Dual function settings are set individually for
each voice combination.
If Dual is not engaged, will appear
instead of and you will be unable to
select the Dual functions. If this happens, press
two voice buttons at the same time to engage
Dual.
F3.1: Dual Balance
Setting range: 0–20 (A setting of “10” produces an
equal balance between the two Dual
voices. Settings below “10” increase
the volume of Voice 2 in relation to
Voice 1, and settings above “10”
increase the volume of Voice 1 in
relation to Voice 2.)
Default setting: Different for each voice combina-
tion.
You can set one voice as the main voice, and another
voice as a softer, mixed voice.
F3.2: Dual Detune
Setting range: -20–0–20 (With positive values, the
pitch of Voice 1 is raised and the
pitch of Voice 2 is lowered. With neg-
ative values, the pitch of Voice 1 is
lowered and the pitch of Voice 2 is
raised.)
Default setting: Different for each voice combina-
tion.
Detune Voice 1 and Voice 2 for Dual to create a thicker
sound.
F3.3: Voice 1 Octave Shift
F3.4: Voice 2 Octave Shift
Setting range: –1, 0, 1
Default setting: Different for each voice combina-
tion.
You can shift the pitch up and down in octave steps for
Voice 1 and Voice 2 independently. Depending on which
voices you combine in Dual, the combination may sound
better if one of the voices is shifted up or down an octave.
F3.5: Voice 1 Effect Depth
F3.6: Voice 2 Effect Depth
Setting range: 0–20
Default setting: Different for each voice combina-
tion.
These functions make it possible to individually set the
depth of the effect for Voices 1 and 2 for Dual. (The effect
depth settings cannot be changed unless the [EFFECT] is
ON. Function must be exited before the [EFFECT] can be
turned ON.)
•“Voice 1” and “Voice 2” are explained on page 17.
F3.7: Reset
This function resets all Dual functions to their default
values. Press the [+/YES] button to reset the values.
F3. Dual Functions
Followed by
a high bar if sharp Followed by
a low bar if flat
(F#) (G) (Ab)
The available setting range is wider in the lower range (± 60 cents
for A-1), and narrower in the higher range (± 5 cents for C7). (100
cents equal one semitone.)
SHORTCUT:
You can jump directly to the Dual functions by pressing the
[TEMPO/FUNCTION] button while holding the two Dual voice but-
tons.
NOTE
NOTE