Yamaha PDP-300 z x

Note: We do not recommend attempting to assemble the PDP-

300 alone. The job can be easily accomplished, however,

with only two people.

Open the box and remove all the parts.

On opening the box you should find the parts shown in

the illustration to the above. Check to make sure that all

the required parts are provided.

Assemble the side panels (D) and base

boards (E).

Install the joint connectors in side panels (D) as shown

in the illustration, then secure the base boards (E) to the

side panels (D) with the long gold-colored screws.

*When installing the joint connectors in the holes in the side

panels (D), make sure that the arrows printed on their upper

surface face in the direction shown in the illustration.

*Make sure that the left and right base boards are facing in the

proper direction as shown in the illustration. The grooved edge

of each base board should face inward.

• Long screws (gold) x 4

• Short large-head screws (black) x 4

• Long screws (black) x 4

• Short screws (black) x 4

• Joint connectors x 4

Main unit

Center panel

Pedal box

Side panels

Base boards

• Short large-head screws (black)

• Long screws (black)

• The protruding

sections of the

metal brackets

at each end of

the center panel

must face up-

ward.

• Long screws (gold)

• Joint connectors