Yamaha PDP-300 c v b, n m

Place the pedal box on top of the brackets attached to

the side panels (D), and attach using the four short large-

head black-colored screws.

The center panel (B) is installed between the side pan-

els (D) with the center lug on each end closer to the

pedal side of the pedal box. Each side of the center panel

is attached using two long black screws.

Place the main unit on the side panels (D) with the

screws on its bottom panel (toward the rear of the main

unit) just behind the grooves in the brackets located at

the top of the side panels (D), then slide the keyboard

forward until it stops.

Align the holes on the bottom panel of the main unit

(A) with the holes in the brackets on the side panels (D),

then screw in and securely tighten the four short black-

colored screws.

cvb

Attach the pedal cord to the two pedal cord holders lo-

cated on the side panel, then insert the pedal cord plug

into the connector located at the bottom of the main

unit’s rear panel, making sure that the tab on the plug

faces forward.

*Check to make sure that all screws have been securely

tightened.

For stability, an adjuster is provided on the bottom of

the pedal box (C). Rotate the adjuster until it comes in

firm contact with the floor surface. The adjuster ensures

stable pedal operation and facilitates pedal effect control.

*If the adjuster is not in firm contact with the floor surface,

distorted sound may result.

• Short screws (black)

• Insert the screws extending from

the bottom of the main unit into

the bracket grooves.

• Cord holders

• Rotate the adjuster unit it coms

in firm contact with the floor

surface.