Yamaha PM1D REMOTE CONTROL SETUP popup window

Screens unique to PM1D Manager

not be affected.) The following data will be initial-

ized.

–Current scene settings

–Current unit settings

–Current patch settings

–Name assigned in the NAME function of each

function

–Setup data (internal parameters not stored in

the scene)

Memory initialization can be performed only when

ofﬂine.

OK button

When you click this button, the settings that you

modiﬁed in Communication Setup will be ﬁnalized,

and the popup window will close.

5CANCEL button

When you click this button, the settings that you

modiﬁed in Communication Setup will be discarded,

and the popup window will close.

REMOTE CONTROL SETUP popup window

To open the REMOTE CONTROL SETUP popup

window, choose [Remote Control Setup] from the

[Option] menu of the menu bar. In this window you

can make settings related to remote control (→p.14).

1REMOTE MACHINE

When the system goes online, or when you click the

RE-SYNCHRONIZE button to establish synchroni-

zation, this ﬁeld will indicate the model name

(DM2000 V2, 02R96 V2, DM1000 V2) of the remote

controller from the MIDI port. You can also select

the model name manually, even if no remote con-

troller is connected.

2RE-SYNCHRONIZE

This button obtains remote controller model infor-

mation from the speciﬁed MIDI port. It also trans-

mits PM1D Manager parameter data to the remote

controller.

3ONLINE/OFFLINE indication

This will indicate ONLINE when communication

with the remote controller has been established.

4CH ASSIGN

Here you can assign the correspondence between

input channels of the remote controller and input

channels of the PM1D, in units of two channels. If

you don’t want to make an assignment, choose “NO

ASSIGN.”

5SCENE ASSIGN

Here you can select the PM1D scene memory num-

bers that correspond to scene memory numbers 00–

99 of the remote controller.

6MIX ASSIGN

Here you can select the PM1D’s MIX channels that will

correspond to the remote controller’s AUX channels 1–

8 (or 1–12 on the DM2000 V2). By operating the AUX

channels of the remote controller you can control the

corresponding MIX channels of the PM1D.

7MATRIX ASSIGN

Here you can select the PM1D’s MATRIX channels

that will correspond to the remote controller’s BUS

channels 1–8. By controlling the BUS channels of the

remote controller you can control the corresponding

MATRIX channels of the PM1D.

8STEREO ASSIGN

Here you can select the PM1D’s STEREO channel

(STEREO A or B) that will correspond to the remote

controller’s STEREO channel.

9ATT

This selects whether ATT operations on the remote

controller will control the PM1D’s ATT or its HA

GAIN (or digital gain).

0IN EQ LOW

This selects whether LOW band EQ operations on an

input channel of the remote controller will control

the PM1D’s LOW band EQ or its HPF.

AOUT EQ

This selects the set of four bands on the PM1D’s

input channel EQ that will be controlled by operat-

ing the four-band EQ of an output channel on the

remote controller.

LOW: SUB LOW, LOW, LOW MID, MID bands

HIGH: LOW MID, MID, HIGH MID, HIGH bands

BEXIT

Closes the REMOTE CONTROL SETUP popup win-

dow.

0 A B