Setting Up
Turn on the power | ● Music rest |
Turn down the volume by turning the [MASTER VOLUME] control to the left and press the [STANDBY/ON] switch to turn on the power.
Pressing the switch again turns the power off.
Backup data in the SmartMedia card (page 84) is loaded to the instrument when the power is turned on. If no SmartMedia card is inserted or if no backup data exists on teh card, all instrument settings are restored to the initial factory defaults when the power is turned on.
NOTE
•To disable automatic loading of SmartMedia card backup data, simultaneously hold down the highest white key on the keyboard (C6) and turn on the power. This allows you start the instrument with the default settings yet still use the SmartMedia card.
•Even when the switch is in the “STANDBY” position, electric- ity is still flowing to the instrument at the minimum level. When you are not using the instrument for a long time, make sure you unplug the AC power adaptor from the wall AC out- let, and/or remove the batteries from the instrument.
•Never attempt to turn the power off when a “WRITING!” mes- sage is shown in the display. Doing so can damage the inter- nal flash memory and result in loss of data.
Insert the music rest into the slots as shown.
15 | ||
|
| |
|
|
|