Using USB Flash Memory
74 PSR-S500 Owner’s Manual
1Connect a USB flash memory to the
USB TO DEVICE terminal, being careful
to insert it in the proper direction. (Do
not try to force an improper connec-
tion.)
2Check that the “CONNECT” message is
shown in the MAIN display.
You can go to the FILE CONTROL display
from which you can access USB flash memory
operations by pressing the [MENU] button
from this display.
(Do not press this button now, but only when
instructed to in the sections below.)
Using USB Flash Memory• In order to play songs copied to a USB flash memory from a
computer or other device, the songs must be stored either in
the USB flash memory’s root directory or a first-level/second-
level folder in the root directory. Songs stored in these location
can be selected and played as USB song (page 28). Songs
stored in third-level-folders created inside a second-level folder
cannot be selected and played by this instrument.
USB flash memory (Root)
Can be
selected/
played.
Cannot be
selected/
played.
Song
File
Song
File
Song
File
Song
Folder
Song
Folder
Song
Folder
root
IMPORTANT Menu Reference Page
Format 75
Save 76
SMF Save 77
Load 78
Delete 79
A message (information or confirmation
dialog) sometimes appears in the display to
facilitate operation. Refer to the “Messages”
section on page 96 for an explanation of each
message.
CONNECT
• No sound will be produced if you play the keyboard while the FILE
CONTROL display is showing. Also, in this state only buttons related
to file functions will be active.
NOTE
• The FILE CONTROL display will not appear in any of the following
cases:
• During style or song playback.
• While data is being loaded from a USB flash memory.
NOTE