RESET button

1Tape deck keys

Controls tape deck.

(The A/B/C switch (E) should be set to the “A” position.) * DIR A, B and A/B are applicable only to double

cassette tape deck.

* For a single cassette deck with automatic reverse function, pressing DIR A will reverse the direction of tape running.

2CD/LD player keys

Controls compact disc player or LD player.

(To control compact disc player, set the A/B/C switch (E) to the “A” position. To control LD player, set the A/B/C switch (E) to the “C” position.)

*DISC is applicable only to compact disc changer.

*STOP is applicable only to LD player.

3Tuner keys

Controls tuner.

(The A/B/C switch (E) should be set to the “A” position.) +: Selects higher preset station number.

: Selects lower preset station number.

A/B/C/D/E: Selects the group (A – E) of preset station numbers.

4DSP program selector keys

Selects a DSP program when the built-in digital sound field processor (including the Dolby Pro Logic Surround decoder) is on.

5TEST key

Used for speaker balance adjustment. (For details, refer to page 17–19.)

6SLEEP timer key

This key is used to turn the built-in SLEEP timer on and off, and to set the SLEEP time. (See page 31 for details.)

72CH/6CH selector key

When the TV/DBS or DVD/LD input source is selected, pressing this key switches the input signals between 2 channel stereo signals and 6 channel discrete signals. When switched to “6CH”, discrete signals from the unit connected to the 6CH DISCRETE INPUT DVD/LD TV/DBS terminals of this unit are selected as the input signals.

8SYSTEM POWER and OFF keys

Pressing the SYSTEM POWER key turns the power of this unit on and pressing the OFF key turns the power off.

*(Except U.S.A. and Canada models)

While the power is on, pressing these keys switches the unit from the power-on mode to the standby mode, and vice versa. (In the standby mode, the standby mode indicator on the front panel is illuminated.)

9RESET button

This button is inside the battery compartment.

Press this button to “reset” the internal microcomputer which controls remote control operations. Microcomputer “reset” is necessary when the remote control freezes.

* Pressing the RESET button will not erase learned functions.

0MASTER VOLUME (up) and (down) keys Turns the volume level up and down.

ADELAY/CENTER/REAR/SWFR selector ( / ) and TIME/LEVEL +/– keys

Adjust the delay time (DELAY), the rear channel output level (REAR), center channel output level (CENTER) and the output level to the SUBWOOFER OUTPUT terminal (SWFR).

Select the item which you want to adjust by pressing the or key and adjust its time or level by pressing the + or key.

BEFFECT ON/OFF key

Switches on/off the digital sound field processor (including the Dolby Pro Logic Surround decoder).

CInput selector keys Selects input source.

DA/B/C indicators

The position (A, B or C) selected by the A/B/C switch is shown in red.

EA/B/C switch

This switch must be used only when the lid of the remote control transmitter is open. (This switch will not function when the lid is closed.)

Normally, set this switch to the “A” position. When controlling a Yamaha LD player by using the CD/LD player keys (2), set this switch to the “C” position.

FTRANSMIT/LEARN indicator

Lights up when the remote control transmitter is transmitting infrared signals (when a command key is pressed).

Note

When using the keys to control Yamaha components, identify them with your component’s keys. If these keys are identical, their functions will be the same. For each key function, refer to the corresponding instruction in your component’s manual.

33