Yamaha R-V902 manual 38

Preset macro keys and the key functions which they carry out sequentially are as follows. (Also, refer to the table on page 34.)

	Function of the key (and area) which operates when a macro key is pressed
Macro key	1st	2nd		3rd
	(Turning the power of this unit on)	(Selecting an input source)		(Playing a source)
TAPE		TAPE	“	” on area A of keys 1
CD		CD	“	” on area A of keys 2
TUNER		TUNER		–
VCR		VCR	“	” on area B of keys 1
DVD/LD	SYSTEM	DVD/LD	“	” on area B of keys 2
	POWER
TV/DBS		TV/DBS		–
			“	” on area C of keys 1
			“	” on area C of keys 2
				–
V-AUX		V-AUX		–
PHONO		PHONO		–
	Function of the key which operates when a macro key is pressed
Macro key	1st	2nd		3rd
SYSTEM	SYSTEM
POWER	POWER	TV
				VCR
		–		–
OFF	OFF

Notes

•A key in which no function is stored will carry out no command.

•If it occurs that this unit will not receive the second command because the internal operation of the first command takes a long time, set the MACRO switch to the “SLOW” position, or add no function or repeat the same command between the first command and the next command.

•If you will program the power on/off switching function of TV, VCR, etc. as part of a macro sequence, note that it switches the current mode to the other (“on” to “off”, or “off” to “on”). For example, when you press the macro key, if the power of TV, VCR, etc. is already on, the power will be turned off

even though you may not want it to do so.

•Once you press a macro key, this unit will not receive the command of another key (even if it is pressed) until this unit finishes carrying out all commands of the macro key. Take notice of this especially when the MACRO switch is in the “SLOW” position.

•Once you press a macro key, you must keep the remote control transmitter directed at the main unit’s remote control sensor until the remote control transmitter finishes transmitting all command signals of the macro key.

•You can use the OPERATION CONTROL keys also while using the macro functions.

38