R Remote Operation Manual 10
Here you can make settings for the HA of the R series units.
① Display select buttons
Click one of these buttons to view the corresponding R series unit at the right. Up to two instances
of R Remote can be simultaneously connected to an R series unit. For example, this would allow
the main operator to operate the CL console while two assistants make small adjustments in
different locations. If you hold down this button, all indicators of the corresponding R series unit
will blink, allowing you to identify that unit.
If the R series unit is not connected, the Rio3224-D settings screen is shown, and the indication
"VIRTUAL" is shown below the button.
② ID/Name indication
Shows the ID number and name of the R series unit.
③ [+48V MASTER] indicator
Indicates the master phantom power on/off status for the R series unit (the on/off setting is
switched on the R series unit itself).