Yamaha RS500, RS700 Specifications

RS500/RS700 Owner’s Manual 5

5. Loosen the bolts of the tom holders and rotate the three tom holders into the positions shown in Figure 3. Then,

retighten the bolts.

6. Loosen the bolts securing the drum trigger module clamp in place, position the clamp with its flat surface facing

upward, and then retighten the bolts.

CAUTION

• Take special care when handling the tom holders in order to avoid injuring yourself with their sharp ends.

For information about the next steps such as assembling Yamaha El ectronic Drum S et, refer to

“Assembly Manual” in the Pad Set.

Specifications

 External dimensions: 1346 (W) x 766.3 (D) x 835 (H) mm (Standard Assembly)  Weight: 10 kg

* Specifications and descriptions in this Owner’s Manual are for information purposes only. Yamaha Corp. reserves the right to

change or modify products or specifications at any time without prior notice. Since specifications, equipment or options may not be

the same in every locale, please check with your Yamaha dealer.

[Figure 3: Example of standard assembly]

Tom holder

Bolts

Left leg

Right leg

Drum trigger

module clamp

Right pillar

Left pillar

Tom holder

Bolts

5555

rs500_700_en_1224.fm Page 5 Friday, December 24, 2010 9:15 AM