Yamaha RS500, RS700 Adjusting the RS500 or RS700

6 RS500/RS700 Owner’s Manual
If your rack is unstable even on a flat surface, check whether the slits in the clamps q to r from Figure 1 line up with the
arrows on the horizontal pipes as shown in Figure 2. If this is not the case, loosen each of the clamp bolts t, adjust the
horizontal pipes such that the arrows line up with the slits, and then retighten the bolts.
Adjusting the RS500 or RS700
[Figure 2: Close-up of clamp q ]
Clamp q
Clamp r
Clamp w
Clamp e
Slit Arrow
Clamp bolt t
Horizontal pipe
Horizontal pipe
Horizontal pipe
Clamp q
[Figure 1: Assembled rack (RS700 shown)]
rs500_700_en_1224.fm Page 6 Friday, December 24, 2010 9:15 AM