APHONES jack

When you listen with headphones, connect the headphones to the PHONES jack.

When listening with headphones privately, set both the SPEAKERS A and B switches to the OFF position.

PHONES

BSPEAKERS switches

Set the switch A or B (or both A and B) for the speaker system (connected to this unit) you will use to the ON position. Set the switch for the speaker system you will not use to the OFF position.

CPRESET STATIONS buttons Select a preset station number (1 to 8).

DTone controls

BASS

Used to increase or decrease the low frequency response. The 0 position produces flat response.

TREBLE

Used to increase or decrease the high frequency response. The 0 position produces flat response.

EBALANCE control

Adjusts the balance of the output volume to the left and right speakers to compensate for sound imbalance caused by speaker location or listening room conditions.

FContinuously variable LOUDNESS control

Used to compensate for the human ears’ loss of sensitivity to high and low-frequency ranges at low volume.

GTUNING MODE (AUTO/MAN’L MONO) button Press this button to switch the tuning mode to automatic or manual. To select the automatic tuning mode, press this button so that the “AUTO TUNING” indicator lights up on the display. To select the manual tuning mode, press this button so that the “AUTO TUNING” indicator goes off.

HREC OUT selector

Used to select an input source and supply that source directly to the REC output terminals on the rear panel, independently of the setting of the INPUT selector. This function allows you to record the selected source while listening to another source.

IINPUT selector

Selects the input source that you want to listen to (and watch).

JVOLUME control

Used to raise or lower the volume level.

10