Adjusting the BALANCE control
Adjust the balance of the output volume to the left and right speakers to compensate for sound imbalance caused from speaker location or listening room conditions.
BALANCE
l | 0 | l |
| ||
2 |
| 2 |
3 |
| 3 |
4 |
| 4 |
L 5 |
| 5 R |
Adjusting the BASS and TREBLE controls
BASS |
| TREBLE | ||||
l | 0 | l |
| l | 0 | l |
|
|
| ||||
2 |
|
| 2 | 2 |
| 2 |
3 |
|
| 3 | 3 |
| 3 |
4 |
|
| 4 | 4 |
| 4 |
5 |
| 5 |
| 5 |
| 5 |
|
| English |
Selecting the SPEAKER system |
| |
|
| |
|
|
|
Because one or two speaker systems can be connected to this unit, the SPEAKERS switches allow you to select speaker system A or B, or both at once.
SPEAKERS
A B
ON 
ON
OFF 
OFF
Adjusting the continuously variable LOUDNESS control
This control provides compensation for the human ears’ loss of sensitivity to high and
1
LOUDNESS | Set to the “FLAT” position. | |
l | FLAT | |
|
| |
BASS : Turn this clockwise to increase (or counterclockwise to decrease) the low frequency response.
TREBLE : Turn this clockwise to increase (or counterclockwise to decrease) the high frequency response.
2 |
| l0 |
3 |
| 9 |
4 |
| 8 |
5 | 6 | 7 |
2
VOLUME | l6 |
20 | l2 |
28 | 8 |
40 | 4 |
602
0
Set to the loudest listening level that you would listen in.
Using the CD DIRECT AMP switch
You can enjoy the purest possible CD sound from your CD player by setting this switch so that the indicator illuminates. By doing so, CD’s input signals are sent to the
CD DIRECT
AMP
Note
If both CD DIRECT AMP and PURE DIRECT switches are on, only the CD DIRECT AMP switch will function.
3
LOUDNESS |
| ||
l | FLAT | Turn until the desired | |
2 |
| l0 | |
3 |
| 9 | volume is gained. |
4 |
| 8 | |
|
| ||
5 | 6 | 7 |
|
Using the PURE DIRECT switch
You can enjoy the purest possible sound from your audio sources by setting this switch so that the indicator illuminates. By doing so, the audio signals bypass the BASS, TREBLE, BALANCE and LOUDNESS controls, thus eliminating any alteration to the audio signals.
PURE
DIRECT
15