01EN_RX-V363_U.book Page 56 Friday, December 7, 2007 5:44 PM

Troubleshooting

Problem

Cause

Remedy

See

 

 

 

 

page

 

 

 

 

 

 

 

 

 

 

 

Only the center

When playing a monaural source with a

 

 

 

 

 

 

speaker outputs

CINEMA DSP program, the source signal

 

 

 

 

 

 

substantial sound.

is directed to the center channel, and the

 

 

 

 

 

 

 

front and surround speakers output effect

 

 

 

 

 

 

 

sounds.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

No sound is heard

“CENTER” in “SPEAKER SET” is set to

Set “CENTER” to “SML” or “LRG”.

45

 

 

 

 

from the center

“NONE”.

 

 

 

 

 

 

speaker.

 

 

 

 

 

 

 

Some sound field programs do not output

Try another sound field program.

34

 

 

 

 

 

 

 

 

 

 

sounds from the center speaker.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

No sound is heard

“SUR. LR” in “SPEAKER SET” is set to

Set “SUR. LR” to “SML” or “LRG”.

45

 

 

 

 

 

 

 

 

from the surround

“NONE”.

 

 

 

 

 

 

speakers.

 

 

 

 

 

 

 

This unit is in the “STRAIGHT” mode

Press L STRAIGHT on the front panel so that

36

 

 

 

 

 

 

 

 

 

 

and a monaural source is being played

“STRAIGHT” disappears from the front panel

 

 

 

 

 

 

back.

display.

 

 

 

 

 

 

 

 

 

 

 

 

 

No sound is heard

“BASS OUT” in “SPEAKER SET” is set

Set “BASS OUT” to “SWFR” or “BOTH”.

46

 

 

 

 

from the subwoofer.

to “FRNT” when a Dolby Digital or DTS

 

 

 

 

 

 

 

signal is being played.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

“BASS OUT” in “SPEAKER SET” is set

Set “BASS OUT” to “BOTH”.

46

 

 

 

 

 

to “SWFR” or “FRNT” when a 2-channel

 

 

 

 

 

 

 

source is being played.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The source does not contain

 

 

 

 

 

 

 

low-frequency bass signals.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Dolby Digital or DTS

The connected component is not set to

Make an appropriate setting following the operating

—

 

 

 

 

sources cannot be

output Dolby Digital or DTS digital

instructions for your component.

 

 

 

 

 

played. (Dolby Digital

signals.

 

 

 

 

 

 

or DTS indicator in

 

 

 

 

 

 

 

Audio input jack select is set to

Set Audio input jack select to “AUTO”.

31

 

 

 

 

the front panel

 

 

 

 

display does not light

“ANALOG”.

 

 

 

 

 

 

up.)

 

 

 

 

 

 

 

A humming sound is

Incorrect cable connections.

Connect the audio cables firmly. If the problem

—

 

 

 

 

heard.

 

persists, the cables may be defective.

 

 

 

 

 

 

 

 

 

 

 

 

 

The volume level

You are attempting to set the volume level

Adjust “MAX VOL.” setting.

48

 

 

 

 

cannot be increased,

higher than the maximum volume level.

 

 

 

 

 

 

or the sound is

 

 

 

 

 

 

 

The component connected to the AUDIO

Turn on the power of the component.

—

 

 

 

 

distorted.

 

 

 

 

 

OUT (REC) jacks on this unit is turned

 

 

 

 

 

 

 

off.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The sound effect

It is not possible to record the sound effect

 

 

 

 

 

 

cannot be recorded.

with a recording component.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A source cannot be

The source component is not connected to

Connect the source component to the analog AUDIO

15, 17

 

 

 

 

recorded by an

the analog AUDIO IN jacks on this unit.

IN jacks.

 

 

 

 

 

analog component

 

 

 

 

 

 

 

connected to the

 

 

 

 

 

 

 

AUDIO OUT (REC)

 

 

 

 

 

 

 

jacks.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The sound field

“MEM.GUARD” in “OPTION MENU” is

Set “MEM.GUARD” to “OFF”.

50

 

 

 

 

parameters and some

set to “ON”.

 

 

 

 

 

 

other settings of this

 

 

 

 

 

 

 

unit cannot be

 

 

 

 

 

 

 

changed.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

This unit does not The internal microcomputer has been

operate properly. frozen by an external electric shock (such as lightning or excessive static electricity) or by a power supply with low voltage.

Disconnect the power cable from the AC wall outlet

—

and then plug it in again after about 30 seconds.

 

“CHECK SP WIRES” appears in the front panel display.

Speaker cables are short-circuited.

Make sure all speaker cables are connected correctly.

11

56 En

Black process 45.0° 240.0 LPI

Page 59 Page 61
Page 60
Image 60
Yamaha RX-V363 owner manual 56 En
Page 59 Page 61

RX-V363 specifications

The Yamaha RX-V363 is a versatile and powerful AV receiver that caters to home theater enthusiasts looking for quality sound and advanced features. Known for its reliability and performance, the RX-V363 brings together an impressive mix of technologies that enhance both audio and visual experiences in the comfort of your home.

One of the standout features of the RX-V363 is its 5.1-channel surround sound capability, which allows you to enjoy immersive audio experiences. With a power output of 100 watts per channel, this receiver fills your space with rich sound and clarity, making it ideal for movies, music, and gaming. The design incorporates Yamaha’s renowned YPAO (Yamaha Parametric room Acoustic Optimizer) technology. This automatic calibration system analyzes the acoustics of your room and optimizes the sound settings accordingly, ensuring that every listener enjoys the best possible audio experience.

Connectivity is another strong point for the RX-V363. It features multiple HDMI inputs, which support high-definition audio and video signals, along with component and composite video inputs. The receiver is also equipped with digital audio inputs for both optical and coaxial sources, promoting seamless integration with various devices such as Blu-ray players, gaming consoles, and streaming devices.

In addition to its advanced audio capabilities, the RX-V363 supports Dolby Digital and DTS decoding, providing authentic surround sound for cinematic experiences. The receiver also includes Yamaha's proprietary Cinema DSP technology, which enables the reproduction of real-world acoustic environments, enhancing the realism of movie soundtracks and music playback.

The RX-V363 is designed with user convenience in mind, featuring an intuitive user interface and an easy-to-navigate on-screen display. The provided remote control gives users effortless access to adjust settings and preferences. The compact and stylish design of the AV receiver ensures it fits well in any home theater setup.

Summarily, the Yamaha RX-V363 combines powerful audio performance with advanced features and user-friendly controls, making it an excellent choice for those seeking to elevate their home entertainment experience. With its impressive audio capabilities, versatile connectivity options, and features like YPAO and Cinema DSP, the RX-V363 stands out as a reliable option for anyone looking to enhance their media consumption.
Top Page Image Contents