Citizen Systems CBM-231 manual Print Control Function, Control Codes List

CBM-230/231 User’s Manual

9.PRINT CONTROL FUNCTION

9.1Control Codes List

	Character	Command/Description
1	HT	Horizontal tab command
2	CR	Print command
3	LF	Printing and paper feed
4	ESC SP	Setting the right space amount of the character
5	!	Specifying collective the print mode
6	%	Specifying/canceling the download character set
7	&	Defining the download characters
8	*	Specifying the bit image mode
9	–	Specifying/canceling the underline
10	2	Specifying the 1/6-inch line feed rate
11	3	Setting the line feed rate n/360 inch
12	@	Initializing the printer
13	D	Setting the horizontal tab position
14	E	Specifying/canceling highlighting
15	G	Specifying/canceling double printing
16	J	Printing and feeds the paper n/360 inch
17	R	Selecting the international characters
18	c3	Selecting the paper near end sensor effective for outputting the paper end signal
19	c4	Selecting the paper near end sensor effective for stopping printing
20	c5	Enabling/disabling the panel switches
21	d	Printing and feeding the paper by n-lines
22	p	Generating the specified pulses
23	t	Selecting the character codes table
24	v	Transmitting the printer status
25	u	Transmitting the status of the peripheral device
26	{	Specifying/canceling the inverted characters
27	V	Specifying/canceling the 90°- right-turned characters
28	$	Specifying the absolute position
29	¥	Specifying the relative position
30	GS k	Printing the bar code
31	w	Selecting the horizontal size (scale factor) of the bar code
32	h	Selecting the height of the bar code
33	H	Selecting the printing position of the HRI characters
34	f	Selecting the font of HRI character
35	*	Defining the download bit image
36	/	Printing the download bit image
37	:	Starting/ending the macro definition
38	^	Executing the macro
39	ESC =	Data input control
40	a	Aligning the the characters
41	i	Full cut
42	m	Partial cut

27 CITIZEN