(15) Specifying/canceling double printing (ESC G n)
Code : [1B]h + [47]h + n
* {0 ≤ n ≤ FF} The data is described with the hexadecimal code.
Specifying/canceling the double printing.
•Only the lowest bit (n0) is effective for "n".
•The following table list the controls by "n".
n0Type
0Cancels double printing.
1Specifies double printing.
•The printing results of double printing and highlighted printing are exactly the same.
.
(16) Printing and feeding the paper n/360 inch (ESC J n)
Code : [1B]h + [4A]h + n
* {0 ≤ n ≤FF} The data is described with the hexadecimal code.
Prints the data in the print buffer and feeds the paper by n/360 inch.
•A set rate does not remain.
•The beginning of the line is assumed to be the next printing start position.
•Since an actual mechanical pitch is 1/203 inch, it is internally converted approximate to the value specified with this command.
(17)Selecting the international characters (ESC R n)
Code : [1B]h + [52]h + n
* {0 ≤ n ≤ 0A) The data is described with the hexadecimal code.
37 | CITIZEN |
