CBM-230/231User ’sManual
50 CITIZEN
• When this command is accepted during macro definition, it means cancellation of macro definition.
When this time done, the definition is cleared.
• Nothingis executedwh en the macro has been undefined or n1=0 has been set.
• When n3 = 1 is set and the macro i s being executed, the paper cannet be fed by the paper fee d switch.
(39) Dat a input control (ESC = n)
Code: [1B]h + [3D]h+ n
*{0≤n≤FF} Thedata is described with the hexadecimal code.
Selectsthe device where data input from the host is effective.
•Eachbit of "n" has the following meanings.
Val ue
Bit Device 01
0 Printer Disabled Enabled
1 Undefined
2 Undefined
3 Undefined
4 Undefined
5 Undefined
6 Undefined
7 Undefined
• Whenthe printer id disabled, thisprinter discards all receive data untilit is enabledby thiscommand.
• Evenif the printer is disabled, it may be placed in the busy state by printer operation.
• Theinitial value of "n" is "1".
(40) Ali gning the character s (ESC a n )
Code: [1B]h + [61]h+ n
*{0≤n≤2} Theda ta is described with the hexadecimal code.
Aligns all printe d data in one line to a specif ied position.
•Justification lis ted in the following tab le is pe rformed depending on the value of "n" .
n(Hex) Position
0 Left alignment
1 Centera lignment
2 Right alignment
•Effectiveonly when this is entered at theb eginningof the line.
•Theinitial value of "n" is "0".