(19) Setting of paper near end sensor available for print stop (ESC c 4 n)
Code : [1B]h + [63]h + [34]h + n
* {0 ≤ n ≤ FF} The data is described with the hexadecimal code.
Specifying the condition of paper near end sensor to stop printing operation.
•Only the lowest bit (n0) is effective for "n".
•The bit of "n" has the followings meaning.
n0 | Type |
0Paper near end disabled
1Paper near end enabled
•An initial value of "n" is specified by the DIP switch (DS1
(20)Enabling/disabling the panel switch (ESC c 5 n)
Code : [1B]h + [63]h + [35]h + n
* {0 ≤ n ≤ FF} The data is described with the hexadecimal code.
Selecting the panel switch enable or disable.
•Only the lowest bit (n0) is effective for "n".
•The bit of "n" has the followings meaning.
n0 | Type |
0LF switch enabled
1LF switch disabled
•The initial value of n is "0".
39 | CITIZEN |
