To play a source with the digital sound field processor

REC/PAUSE

STOP

DECK A/B

VCR MON

CENTER

PRO LOGIC

3 STEREO

2

MODE

+

 

SUR.

HALL

ROCK

 

DELAY

EFFECT

VOLUME +

TIME

ON/OFF

English

3 2

1

Notes

3

Follow steps 1 – 6 shown in “BASIC OPERATIONS” on page 14.

2 Turn the DSP on, so that a program name appears on the display.

EFFECT

HALL

3 Select the desired program that is suitable for the source.

PROGRAM

TEST

PRO LOGIC

The selected program name is shown on the display.

4 If desired, adjust the delay time and the output level of each speaker. (For details, refer to the corresponding descriptions on the next page.)

If you prefer to cancel the DSP, press the EFFECT switch. The sound will be the normal 2-channel stereo without surround sound effect.

When ROCK or HALL is selected, no sound is heard from the center speaker.

When a monaural sound source is played with DOLBY PRO LOGIC or DOLBY 3 STEREO, no sound is heard from the front speakers and the rear speakers. Sound is heard only from the center speaker. For DOLBY PRO LOGIC only, however, if the center channel mode is in PHANTOM, the front speakers output the sound of the center channel.

When this unit’s Dolby Pro Logic Surround system is used, if the main-source sound is considerably altered by overadjustment of the BASS or TREBLE controls, the relationship between the center and rear channels may produce an unnatural effect.

27