ANTENNA CONNECTIONS

Each antenna should be connected to the designated terminals correctly, referring to the following diagram.

Both AM and FM indoor antennas are included with this unit. In general, these antennas will probably provide sufficient signal strength. Nevertheless, a properly installed outdoor antenna will give clearer reception than an indoor one. If you experience poor reception quality, an outdoor antenna may result in improvement.

Outdoor FM antenna

Outdoor AM antenna

Indoor FM antenna (included)

English

75-ohm/300-ohm antenna adapter

75-ohm coaxial cable

75-ohm/300-ohm antenna adapter

300-ohm feeder

Ground

AM loop antenna (included)

75Ω

UNBAL.

FM

ANT

GND

AM

ANT

Connecting the AM loop antenna

1

2

3

Orient so that the best reception is obtained.

*The AM loop antenna should be placed apart from the main unit. The antenna may be hung on a wall.

*The AM loop antenna should be kept connected, even if an outdoor AM antenna is connected to this unit.

GND terminal

For maximum safety and minimum interference, connect the GND terminal to a good earth ground. A good earth ground is a metal stake driven into moist earth.

Notes

When connecting the indoor FM antenna, insert its connector into

the FM ANT terminal firmly.

If you need an outdoor FM antenna to improve

FM reception quality, either 300-ohm feeder or coaxial cable may be used. In locations

troubled by electrical interference, coaxial cable is preferable.

13